Support Intel Bay Trail J1900 Quad core processor
Intel HD graphics and DriectX 11 support
Dual channel DDR3L with two connectors for MAX. 8GB memory
Dual independent display from HD-Out, VGA, and Embedded Display-Port* / LVDS connectivity
Features high speed Gigabit Ethernet connection
Features 2 SATA 3Gb/s
Two Hi-Speed USB3.0 ports support
Five USB2.0 ports support
One PCIe connector for the future Add-in card
Two PCI Express Mini Card connector for expansion card
8 V to 19 V wide-range voltage input via back-panel DC jack or internal power connector

Device specification

Form Factor

Low-profile Mini-ITX (20 millimeters [0.79 inches] x 170.18 millimeters [6.7 inches] x 170.18 millimeters [6.7 inches])


Intel Bay Trail J1900 Processor with integrated graphics (*Remark: Compatible with J1800 and J2900)

Main Memory

2 x 204-pin DDR3L SO-DIMM
Support for dual channel DDR3L 1333/1600(runs at 1333 MHz) SO-DIMMs
Support for up to 8 GB of system memory on a single SO-DIMM (or 4 GB each by 2 SO-DIMM)

Integrated Graphics

Analog displays (VGA)
Digital displays (HD-Out)
Embedded DisplayPort* eDP*
External graphics support via a PCI Express 1.0a x1 graphics add-in card connector
Integrated graphics:
Internal flat panel displays:


2 + 2 Channel High Definition Audio ( HD Audio) using a Realtek* ALC888S audio codec supporting:
8-channel (7.1) HD Audio via the HD-Out interface
Analog line-in (back panel jack)
Analog stereo line-out (back panel jack)
DMIC digital microphone input (internal header)
Front panel HD Audio/AC’97 headphones/mic support (internal header)
In-chassis stereo speakers support (3 W/3 Ω via an internal header)
S/PDIF digital audio output (internal header)

Expansion Capability

1 x PCI Express 1.0a x1 add-in card connector Option: PCI Express 1.0a x4 add-in card connector by 2 lanes
1 x PCI Express Full-/Half-Mini Card slot
1 x PCI Express Half-Mini Card slot

Peripheral Interfaces

1 x SATA 3.0 Gb/s port (multiplexed with an mSATA port, routed to the PCI Express Full-/Half-Mini Card slot)
2 x SATA 3.0 Gb/s
2 x USB 2.0 high-current/fast-charging ports (Yellow)
2 x USB 3.0 back panel connectors (blue)
5 x USB 2.0 front panel ports

Legacy I/O

1 x Parallel port via an onboard header
2 x Serial ports onboard headers
Hardware management support
Legacy I/O Controller (NCT6683D) that provides:


Realtek RTL8111G-CG Gigabit (10/100/1000 Mb/s) Ethernet LAN controller including an RJ-45 back panel connector with integrated status LEDs


BIOS resident in a Serial Peripheral Interface (SPI) Flash device
Support for Advanced Configuration and Power Interface (ACPI), and System Management BIOS (SMBIOS)

Hardware Management

3-pin system fan header with speed control
Nuvoton NCT6683D based subsystem, including:
Thermal sense to detect out of range thermal values
Voltage sense to detect out of range power supply voltages

Power Requirement

DC connectivity via back-panel DC jack(2.5mm/ ID, 5.5mm/ OD)
Internal 2 pin power connector


Operating Temperature: 0 °C to +60 °C
Storage Temperature: -20°C to +70°C